Recent advances and biomedical application of 3D printed nanocellulose-based adhesive hydrogels: A review.

Nanocellulose-based tissue adhesives show promise for achieving rapid hemostasis and effective wound healing. Conventional methods, such as sutures and staples, have limitations, prompting the exploration of bioadhesives for direct wound adhesion and minimal tissue damage. Nanocellulose, a hydrolysis product of cellulose, exhibits superior biocompatibility and multifunctional properties, gaining interest as a base material for bioadhesive development. This study explores the potential of nanocellulose-based adhesives for hemostasis and wound healing using 3D printing techniques. Nanocellulose enables the creation of biodegradable adhesives with minimal adverse effects and opens avenues for advanced wound healing and complex tissue regeneration, such as skin, blood vessels, lungs, cartilage, and muscle. This study reviews recent trends in various nanocellulose-based 3D printed hydrogel patches for tissue engineering applications. The review also introduces various types of nanocellulose and their synthesis, surface modification, and bioadhesive fabrication techniques via 3D printing for smart wound healing.

Extracellular Matrix-Bioinspired Anisotropic Topographical Cues of Electrospun Nanofibers: A Strategy of Wound Healing through Macrophage Polarization.

The skin serves as the body's outermost barrier and is the largest organ, providing protection not only to the body but also to various internal organs. Owing to continuous exposure to various external factors, it is susceptible to damage that can range from simple to severe, including serious types of wounds such as burns or chronic wounds. Macrophages play a crucial role in the entire wound-healing process and contribute significantly to skin regeneration. Initially, M1 macrophages infiltrate to phagocytose bacteria, debris, and dead cells in fresh wounds. As tissue repair is activated, M2 macrophages are promoted, reducing inflammation and facilitating restoration of the dermis and epidermis to regenerate the tissue. This suggests that extracellular matrix (ECM) promotes cell adhesion, proliferation, migrationand macrophage polarization. Among the numerous strategies, electrospinning is a versatile technique for obtaining ECM-mimicking structures with anisotropic and isotropic topologies of micro/nanofibers. Various electrospun biomaterials influence macrophage polarization based on their isotropic or anisotropic topologies. Moreover, these fibers possess a high surface-area-to-volume ratio, promoting the effective exchange of vital nutrients and oxygen, which are crucial for cell viability and tissue regeneration. Micro/nanofibers with diverse physical and chemical properties can be tailored to polarize macrophages toward skin regeneration and wound healing, depending on specific requirements. This review describes the significance of micro/nanostructures for activating macrophages and promoting wound healing.

Stimuli-Responsive 3D Printable Conductive Hydrogel: A Step toward Regulating Macrophage Polarization and Wound Healing.

Conductive hydrogels (CHs) are promising alternatives for electrical stimulation of cells and tissues in biomedical engineering. Wound healing and immunomodulation are complex processes that involve multiple cell types and signaling pathways. 3D printable conductive hydrogels have emerged as an innovative approach to promote wound healing and modulate immune responses. CHs can facilitate electrical and mechanical stimuli, which can be beneficial for altering cellular metabolism and enhancing the efficiency of the delivery of therapeutic molecules. This review summarizes the recent advances in 3D printable conductive hydrogels for wound healing and their effect on macrophage polarization. This report also discusses the properties of various conductive materials that can be used to fabricate hydrogels to stimulate immune responses. Furthermore, this review highlights the challenges and limitations of using 3D printable CHs for future material discovery. Overall, 3D printable conductive hydrogels hold excellent potential for accelerating wound healing and immune responses, which can lead to the development of new therapeutic strategies for skin and immune-related diseases.

Development of A 14.8-MEV Mono-Energetic Neutron Field in Korea Research Institute of Standards and Science.

A standard irradiation field for 14.8-MeV neutrons is under development for mono-energetic neutron standards research in the Korea Research Institute of Standards and Science, Republic of Korea. We developed a target chamber with the associated alpha particle (AAP) system for 14.8-MeV mono-energetic neutrons by a T(d,n)4He reaction. We designed the target chamber and the AAP detector system using a two-body kinematic calculation. We conducted simulations of the T(d,n)4He reaction on a tritiated target to determine a specification of the target and the AAP detector. This paper will discuss the simulation and calculation results for the associated particle system design.

An induced annual modulation signature in COSINE-100 data by DAMA/LIBRA's analysis method.

The DAMA/LIBRA collaboration has reported the observation of an annual modulation in the event rate that has been attributed to dark matter interactions over the last two decades. However, even though tremendous efforts to detect similar dark matter interactions were pursued, no definitive evidence has been observed to corroborate the DAMA/LIBRA signal. Many studies assuming various dark matter models have attempted to reconcile DAMA/LIBRA's modulation signals and null results from other experiments, however no clear conclusion can be drawn. Apart from the dark matter hypothesis, several studies have examined the possibility that the modulation is induced by variations in detector's environment or their specific analysis methods. In particular, a recent study presents a possible cause of the annual modulation from an analysis method adopted by the DAMA/LIBRA experiment in which the observed annual modulation could be reproduced by a slowly varying time-dependent background. Here, we study the COSINE-100 data using an analysis method similar to the one adopted by the DAMA/LIBRA experiment and observe a significant annual modulation, however the modulation phase is almost opposite to that of the DAMA/LIBRA data. Assuming the same background composition for COSINE-100 and DAMA/LIBRA, simulated experiments for the DAMA/LIBRA without dark matter signals also provide significant annual modulation with an amplitude similar to DAMA/LIBRA with opposite phase. Even though this observation does not directly explain the DAMA/LIBRA results directly, this interesting phenomenon motivates more profound studies of the time-dependent DAMA/LIBRA background data.

Strong constraints from COSINE-100 on the DAMA dark matter results using the same sodium iodide target.

We present new constraints on dark matter interactions using 1.7 years of COSINE-100 data. The COSINE-100 experiment, consisting of 106 kg of tallium-doped sodium iodide [NaI(Tl)] target material, is aimed to test DAMA's claim of dark matter observation using the same NaI(Tl) detectors. Improved event selection requirements, a more precise understanding of the detector background, and the use of a larger dataset considerably enhance the COSINE-100 sensitivity for dark matter detection. No signal consistent with the dark matter interaction is identified and rules out model-dependent dark matter interpretations of the DAMA signals in the specific context of standard halo model with the same NaI(Tl) target for various interaction hypotheses.

DEVELOPMENT OF SIMULATED WORKPLACE FIELDS AT KRISS FOR PERFORMANCE TEST OF NEUTRON PERSONAL DOSEMETERS.

Simulated workplace neutron fields have been developed at the Korea Research Institute of Standards and Science (KRISS). An (241)Am-Be neutron source and a cylindrical moderator composed of stainless steel and heavy water were installed in a 10-cm-thick concrete block with dimensions of 150 × 120 × 120 cm(3) The neutron energy spectrum at a distance of 66.5 cm was measured using a Bonner sphere spectrometer and was found to agree with the spectrum obtained from the Monte Carlo N-Particle Extended simulation to within 5 %. The neutron fluence-to-personal dose equivalent conversion coefficients were (20.8-43.6) pSv·cm(2) and were thus in good agreement with those of reactor fields. The results showed that the KRISS-simulated workplace neutron fields can be used for performance tests and the calibration service of neutron personal dosemeters.

Absolute measurement of (198)Au activity in gold foil using plastic scintillators and a well-type NaI(Tl) detector.

A beta-gamma coincidence system has been developed for measuring (198)Au activity in gold foils. The system was validated by Monte Carlo simulations and by measuring the activity of a (60)Co point-source. To study effects such as self-shielding of beta particles in gold foils, (198)Au activity measurements and simulations were performed for various scintillators and foil sizes. The measured (198)Au activities were ~1% above the reference activity, which might be due to self-shielding of beta particles. The measured and simulated (198)Au activities agreed, suggesting feasibility of precise activity measurement.

Long counter and its application for the calibration of the neutron irradiators.

The Korea Research Institute of Standards and Science (KRISS) has constructed a new long counter that can be disassembled in parts and reassembled. This counter can be easily transported and used as a transfer standard instrument for neutron fluence measurements. The response function and the effective centre of the counter are investigated by calculating neutron energies from thermal to 30 MeV using MCNPX. By carrying out measurements using a (252)Cf source in the KRISS irradiation room, the accuracy of the evaluated effective centre position is confirmed. The 'distance variation method' is adopted to eliminate the effect of inscatter neutrons. This method is effective and used for the experimental determination of the effective centre. The neutron emission rates determined by the neutron fluence measurements using the long counter developed are compared with those measured by a manganese sulphate bath, and show good agreement within 3 %.

Measurement of the 250Cf component in a 252Cf neutron source at KRISS.

Neutron emission rate measurements have been carried out at the Korea Research Institute of Standards and Science using a manganese sulphate bath system for (252)Cf and (241)Am-Be sources since 2004. The relative measurement method was chosen in 2012, and the neutron emission rates agreed with those by the absolute measurement method within uncertainties. The neutron emission rate of an old (252)Cf source has been measured three times: in 2004, 2009 and 2012. The (250)Cf component was fitted to a double-exponential function of (252)Cf+(250)Cf, and the ratio of the (250)Cf component to the (252)Cf component was estimated to be 7.8 % in 2004 and 46.8 % in 2012. Underestimation of the neutron emission rates of old (252)Cf sources can be corrected if the neutron emission rate of the (250)Cf component is taken into account.

Neutron spectrum at the underground laboratory for the ultra low background experiment.

We measured the background neutron spectrum using a Bonner sphere spectrometer at the YangYang underground laboratory, where the vertical earth overburden is approximately 700 m. The neutron fluence rate and the energy spectrum were determined through the unfolding procedure. The measured neutron fluence rate was (0.242 ± 0.008) n cm(-2)h(-1) for k=1, and most of the neutrons were below 20 MeV.